Mountain View, CA

How much does a new oil furnace cost to install or replace?

$2,500 – $6,000 Average replacement cost
$3,000 – $10,000 High-efficiency system cost

An oil furnace replacement costs $2,500 to $6,000 on average. A new oil furnace installation with an oil tank replacement costs $4,200 to $8,800. Oil furnace prices are $1,200 to $4,000 for standard oil heating systems, without installation. High-efficiency oil furnaces cost $3,000 to $10,000.

Get free estimates from furnace installers near you or view our cost estimates below.

Reviewed and approved on June 15, 2021, by Tom Grupa and 3 expert furnace installers on HomeGuide.

New oil furnace cost

A new oil furnace costs $2,500 to $6,000 to replace on average. Oil furnace prices are $1,200 to $4,000 for the oil burner, plus $1,000 to $3,000 for installation labor. Operating costs to run a forced-air oil furnace are $80 to $145 monthly. The best oil furnace brands are Adams, Kerr, and Regal.

Oil furnace replacement cost - chart
Oil furnace replacement cost - chart

New oil furnace cost
Home size (Square feet) Unit cost Total replacement cost
1,300 – 1,600 $1,400 – $2,600 $2,400 – $5,600
1,600 – 1,900 $1,500 – $2,700 $2,500 – $5,700
1,900 – 2,200 $1,600 – $2,800 $2,600 – $5,800
2,200 – 2,600 $1,700 – $3,000 $2,700 – $6,000
2,600 – 3,200 $2,000 – $4,000 $3,000 – $7,000
  • Oil furnaces are commonly used in colder climates like the Northeastern United States.
  • Oil furnaces provide more heat per BTU than other fuels, but has a lower energy-efficiency rating (AFUE) than natural gas.
  • Oil furnaces last 15 to 25 years on average.
  • Oil-burning furnaces require a large storage tank.
  • Regular maintenance is more extensive due to dirt and soot buildup and requires changing filters frequently.
  • Oil furnaces are cheaper upfront but cost 2.5 times more to operate than gas systems.
  • Compare furnace installation costs of all fuel types, including gas, electric, and propane.

Average cost of new oil furnace installation

The following table shows the average cost to install a new oil furnace.

Average cost to install new oil furnace - chart
Average cost to install new oil furnace - chart

Average cost of new oil furnace installation
National average cost $4,000
Minimum cost $2,200
Maximum cost $13,000
Average range $2,500 to $6,000

*Based on 40 project costs reported by HomeGuide members.

Get free quotes from oil furnace installers near you. View Pros

Oil furnace replacement cost

An oil furnace replacement costs $2,650 to $7,300 on average, including permits. Total oil-burner replacement costs depend on the furnace location, system complexity, electrical upgrades, and ductwork modifications.

Oil furnace replacement cost
Factor Average cost
New furnace $1,400 – $2,800
Installation labor $1,000 – $3,000
Permits & inspections $250 – $1,500
Total $2,650 – $7,300

*Labor includes removing the old furnace.

Ducts need full or partial replacements if they don’t fit new building code standards, have leaks, or don’t fit with the new furnace parts. Ductwork replacement costs $1,400 to $5,600 on average or $25 to $55 per linear foot.

Oil furnace replacement in residential house
Oil furnace replacement in residential house

Return to Top

Oil furnace prices

Oil-fired furnace prices for homes are $1,200 to $10,000 without installation, depending on the energy efficiency, brand, and BTU heating capacity.

High-efficiency oil furnace prices

High-efficiency condensing oil furnaces with 90% to 97% AFUE ratings cost $3,000 to $10,000 from brands like Adams, Kerr, Granby, and Thermo Pride. Condensing furnaces have two heat exchangers and an extra vent or condenser drain. Basic oil furnaces are 80% to 87% efficient with one heat exchanger.

High-efficiency oil furnace prices
Type Price range AFUE
Standard efficiency $1,200 – $4,000 80% – 87%
High-efficiency $3,000 – $10,000 90% – 97%

*Not including installation. AFUE stands for Annual Fuel Utilization Efficiency, which is the energy-efficiency rating.

A high-efficiency unit may be eligible for a federal tax credit of up to $300 and other local rebates.

Hybrid heating or dual-fuel systems that use an air-source heat pump are the most energy-efficient. Adding a hybrid heat pump costs $2,500 to $6,000 more on average.

Best oil furnace prices by brand

The best oil furnace brands include Adams, American Standard, Carrier, Kerr, Regal, Trane, and Thermo Pride. Some brands offer extended warranty options and high-efficiency furnaces.

Best oil furnace brands and prices
Brand Unit cost Total replacement cost
Adams $3,100 – $10,000 $4,100 – $13,000
American Standard $1,200 – $2,000 $2,200 – $5,000
Armstrong Air $1,200 – $4,300 $2,200 – $7,300
Bryant $1,500 – $3,900 $2,500 – $6,900
Blueridge $1,500 – $2,000 $2,500 – $5,000
Carrier $1,800 – $2,600 $2,800 – $5,600
Century / Mars $2,000 – $4,000 $3,000 – $7,000
Comfort-Aire $1,700 – $3,000 $2,700 – $6,000
Crown Boiler $1,900 – $3,100 $2,900 – $6,100
Ducane $1,400 – $3,700 $2,400 – $6,700
Granby $1,800 – $3,400 $2,800 – $6,400
Heil QuietComfort $1,700 – $2,200 $2,700 – $5,200
Kerr $3,300 – $5,000 $4,300 – $8,000
Lennox $1,900 – $3,200 $2,900 – $6,200
Miller / Nortek $1,900 – $4,200 $2,900 – $7,200
Olsen $1,700 – $3,700 $2,700 – $6,700
Regal / Regal Star $1,800 – $3,000 $2,800 – $6,000
Rheem / Ruud $1,400 – $4,000 $2,400 – $7,000
Thermo Pride $2,300 – $3,200 $3,300 – $6,200
Trane $1,400 – $3,000 $2,400 – $6,000
Williamson-Thermoflo $1,700 – $3,500 $2,700 – $6,500
Find top-rated furnace companies in your area. View Pros

Cost of new oil-burning furnace by BTU

A new oil furnace costs $1,200 to $4,000 without installation, for standard-efficiency models. Oil furnaces range from 60,000 to 150,000 BTUs per hour of heating capacity.

New oil furnace cost by BTU
Furnace size (BTU) Unit price Total replacement cost
60,000 $1,200 – $2,400 $2,200 – $5,400
70,000 $1,300 – $2,500 $2,300 – $5,500
80,000 $1,400 – $2,600 $2,400 – $5,600
90,000 $1,500 – $2,700 $2,500 – $5,700
100,000 $1,600 – $2,800 $2,600 – $5,800
120,000 $1,700 – $3,000 $2,700 – $6,000
140,000 $1,800 – $3,700 $2,800 – $6,700
150,000 $2,000 – $4,000 $3,000 – $7,000

*Based on 80% to 87% AFUE furnace models.

British Thermal Units (BTU) measures the amount of heat output. A 100,000 BTU furnace with 90% efficiency only produces 90,000 BTUs of heating.

Return to Top

Oil furnace installation cost factors

A new oil furnace installation costs $2,500 to $6,000 on average, depending on the required ductwork modifications, electrical upgrades, and whether it’s a new install or replacement. All oil furnaces need a 120-volt electrical connection, oil-storage tank, and exhaust ventilation nearby.

Oil furnace installation cost factors
Factor Average cost
Old furnace removal $150 – $400
New oil furnace $1,400 – $2,800
Installation labor $1,000 – $3,000
Oil tank replacement $1,000 – $6,200
Replacing ductwork $1,400 – $5,600
Asbestos inspection / testing $250 – $700
Asbestos abatement $700 – $2,200
Electrical control connections & repairs $100 – $250
Permits & inspections $250 – $1,500
Condensation drain (high-efficiency models) $200 – $600
Stainless steel chimney liner (low-efficiency models) $900 – $3,800

Oil furnace efficiency

Most new oil furnaces have 80% to 87% AFUE efficiency ratings. High-efficiency oil condensing furnaces are 90% to 97% efficient because they have two heat exchangers instead of one. Oil furnace efficiency decreases to 60% to 70% after 15 to 20 years without annual maintenance.

Improve the system’s overall energy efficiency by:

Labor cost to replace an oil heating system

Labor costs for oil furnace replacements are $1,000 to $3,000 on average. Furnace service technicians cost $75 to $150 hourly. Oil furnace installation takes 6 to 12 hours on average. Prices depend on site accessibility, ductwork upgrades, electrical connection work, and oil-storage tank location.

  • New oil furnace installation labor is $1,200 to $2,200 on average with favorable site conditions.
  • Each contractor’s assistant costs an additional $30 to $50 hourly.
  • Installations in crawl spaces and attics cost more than standard basement installs.
  • Oil furnaces installed in unventilated areas need additional ductwork, a PVC flue, and sometimes an external vent through the outside wall.
Furnace installers in your area are ready to help. View Pros

Old oil furnace removal and disposal

Removing and disposing of an oil furnace costs $150 to $400 on average. Most contractors include this service in the labor costs of their quote. Ask HVAC technicians if they offer discounts on oil furnace removals when the old unit contains valuable scrap metals.

Heating-oil tank removal or replacement cost

Oil tank replacements cost $1,000 to $6,200 on average, depending on the tank size, location (basement or underground), and pipe length to the tank. Oil tank removal alone costs $400 to $3,500 according to the tank’s condition and whether it’s above ground or underground.

Oil tank removal or replacement cost
Tank type Replacement cost Removal only cost
Above ground (basement) $1,000 – $4,300 $400 – $1,500
Underground $1,600 – $6,200 $1,000 – $3,500

Oil tank replacement in home backyard for oil furnace
Oil tank replacement in home backyard for oil furnace

  • Cleaning underground clogged oil lines costs $200 to $1,000 on average.
  • Above-ground oil tank installation takes 3 to 5 hours, and underground oil tanks take 8 to 14 hours to install.
  • When replacing an oil furnace or switching to a different fuel source, the oil tank and line typically need replacing as well.
  • In some states, removing unused oil tanks underground is mandatory.

Oil furnace permits and inspection fees

Oil furnace permits and inspection fees cost $250 to $1,500 on average, depending on local building codes and whether it’s a replacement or new installation. Electrical permits cost $50 to $350 for upgrading wiring to the furnace controls in older homes. Contractors should pull all permits.

Cost to convert propane furnace to oil

Replacing a propane furnace with an oil furnace costs $4,600 to $10,700 on average. Installers remove the old propane tank, propane lines, and old furnace. Then contractors install a new heating-oil tank, oil lines, and oil furnace.

Cost to replace propane furnace with oil
Factor Average cost
Removing old propane furnace $150 – $400
New oil furnace installed $2,600 – $5,000
New oil tank installed in basement $1,600 – $3,800
Permits and inspections $250 – $1,500
Total $4,600 – $10,700

Additional costs may include:

  • Removing a propane tank costs $500 to $1,000 on average. Some companies remove a leased tank for free, depending on the contract terms.
  • Replacing ductwork costs $1,400 to $5,600 on average or $25 to $55 per linear foot.
  • Installing an underground oil tank costs $1,900 to $6,000.
Alternatively, replacing a propane furnace costs $2,200 to $5,700 on average.

Return to Top

Operating cost to run an oil furnace

Operating an oil furnace costs $80 to $145 monthly or $1,000 to $1,750 per year to run on average. Costs depend on the home’s size, climate, interior heating preferences, heating system efficiency, and current oil prices. Oil costs $2.30 to $3.00+ per gallon, and tanks hold 300 to 500 gallons.

Oil furnace operating costs
Home size (square feet) Annual cost to run
1,300 – 1,600 $1,000 – $1,300
1,600 – 1,900 $1,300 – $1,500
1,900 – 2,200 $1,500 – $1,750
2,200 – 2,600 $1,750 – $2,100
2,600 – 3,200 $2,100 – $2,500

*Prices of on-demand oil deliveries only. Fees of oil sellers vary by location.

  • Oil companies fill the oil tanks on-demand or by auto-delivery.
  • Oil furnaces use minimal electricity, so heating oil is the main cost.

Return to Top

Oil-burning furnace pros and cons

Oil-burning furnace pros and cons
Pros Cons
  • Works well in colder climates
  • Provides more heat per BTU than other fuels
  • Easy to get service and maintenance
  • Lasts up to 30 years with proper maintenance
  • Oil is flammable but not explosive
  • Produces fewer emissions than gas systems
  • Natural gas furnaces cost less to install.
  • Lower AFUE ratings than natural gas furnaces
  • Oil prices can fluctuate and cost more than gas
  • Costs more to operate than gas furnaces
  • Requires a storage tank
  • Burning oil creates dirt and soot buildup and requires more maintenance
  • May be noisier than gas systems
Consult with top-rated furnace companies in your city. View Pros

Return to Top

What size oil furnace do I need?

More than 80% of oil furnaces are in the Northeastern U.S. and use 45 to 60 BTUs per square foot. Homes 1,600 to 2,600 square feet need an oil furnace with 72,000 to 150,000 BTUs of heating capacity. The ideal oil furnace size depends on the home's square footage, outdoor temperatures, and insulation.

Oil furnace sizing chart
Home size (square feet) Size required (BTUs)
1,300 – 1,600 60,000 – 95,000
1,600 – 1,900 72,000 – 115,000
1,900 – 2,200 85,000 – 130,000
2,200 – 2,600 100,000 – 150,000
2,600 – 3,200 115,000 – 190,000

*Based on 45 to 60 BTUs of heating power per square foot. Contractors use the Manual J load calculation to size the furnace for maximum efficiency.

Furnace size calculator - heating climate zones
Furnace size calculator - heating climate zones

Return to Top

What is an oil furnace?

An oil furnace is a home heating system that converts oil to heat. Oil furnaces are common in colder climates like the Northeastern United States.

How long does an oil furnace last?

Oil furnaces last 15 to 25 years, depending on the usage, brand, installation, and repairs. Some oil furnaces last more than 30 years if properly sized, installed correctly, and serviced annually. Consider replacing an oil furnace more than 15+ years old that requires frequent repairs.

To extend the life of an oil furnace:

  • Clean the air and oil-line filters monthly during the fall and winter.
  • Hire HVAC specialists to clean the air ducts and seal leaks every other year.
  • Add a programmable thermostat to avoid overworking the unit.
  • Don’t use low-grade heating oils that cause toxic system buildups.
  • Turn off the furnace, and then vacuum around it and inside the burner annually.

When should you replace an oil furnace?

Consider replacing an oil furnace more than 15+ years old that requires frequent repairs. The older the oil furnace, the less effective they become. Schedule a professional inspection when noticing any of the following warning signs:

When to replace an oil furnace or tank
Replace an oil furnace when: Replace an oil-storage tank when:
  • The furnace makes unusual noises.
  • Much more oil burns than usual.
  • Only cool air comes from vents.
  • Vents blow out excessive dust even after cleaning air filters.
  • The furnace is an older model with asbestos fire bricks in the combustion chamber.
  • The tank has damage like rust, dents, or discoloration.
  • Legs of the tank are unstable.
  • The fuel gauge breaks.
  • Puddles of oil are under the tank.
  • The tank is more than 10 to 20 years old.
  • Home interior smells of oil.
  • Cracks appear in the tank lines.

Oil furnace replacements, installs, and repairs are not DIY projects for homeowners due to building codes fire hazards.

Still have questions? Ask furnace installers near you. View Pros

Return to Top

Hiring an oil furnace installer

Licensed HVAC professionals know how to correctly calculate a home’s heating needs and select the correct oil furnace size. Before hiring a contractor, use this checklist when requesting estimates:

  • Check that the HVAC installers have certifications from a North American Technician Excellence (NATE) organization like the American Society of Heating, Refrigeration, and Air-Conditioning Engineers (ASHRAE).
  • Compare furnace replacement quotes from at least three different companies.
  • Remember the lowest bids typically signal low-quality work.
  • Choose licensed, insured, and bonded HVAC contractors with years of experience installing oil furnaces in your area.
  • Get copies of project estimates, heating-load calculations, orders, permits, contracts, and warranties.
  • Check estimates for all material, labor, and equipment costs as well as the installation schedule.
  • Review the seller’s ratings on HomeGuide, Google, and the Better Business Bureau (BBB).
  • Ask all questions about total project costs before signing any contracts.
  • Create a payment schedule instead of making a full payment beforehand.

Questions to ask

  • How many furnaces have you installed, and which type do you specialize in?
  • Can I see references from your previous oil furnace installs?
  • Are all your labor and materials fees in this estimate? What other costs typically apply?
  • Do you provide discounted repairs and annual inspections for this oil furnace?
  • Considering my average heat use, how often will I need oil tank refills?
  • Do you offer an auto-fill service for my oil tank to monitor my supply for me?
  • If my oil-storage tank also needs replacing, how much more will that cost?
  • Will this new furnace work with my existing ductwork and thermostat controls?
  • Does the line from my oil-storage tank to the furnace need replacing?
  • Do I need wiring upgrades to power the furnace motor and ignition?
  • Will you size the furnace with Manual J load calculations?
  • Do you offer a home energy audit to suggest more energy-efficiency upgrades?
  • How long should the job take?
  • Does the estimate include removing all debris afterwards?
  • Which oil-furnace accessories would help lower my energy costs?
  • Does this furnace installation meet all local building codes?
  • Will I need a backup heater for this furnace system?
  • If additional ductwork is necessary, will you supervise that as well?
  • Will you pull all permits for this project and manage inspections?
  • What’s in your warranty policy?
  • What is the payment schedule for this project?
  • What types of financing options do you offer?

Get free estimates on HomeGuide from trusted oil furnace installers:

Get free estimates


New oil furnace
Looking for a furnace installer near you?
Get free custom quotes from qualified pros in your area.

Looking for furnace installers near you?


Answer some questions

Let us know about your needs so we can bring you the right pros.

Get quotes

Receive quotes from multiple pros that meet your exact needs.

Hire the right pro

Compare quotes, message or call pros, and hire only when ready.