How Much Does It Cost To Clean A Main Sewer Line?

Main Sewer Line Clog Cost

Main sewer line clogs cost $150 to $800 to clear. Snaking a sewer line costs $150 to $500 on average. Hydro jet sewer cleaning costs $250 to $800 on average. Costs to unclog a main sewer line depend on the severity of the clog, accessibility, repairs, and local labor.

• Signs the sewer line is clogged is pipes making gurgling sounds, multiple plumbing fixtures are draining slowly, bad odors come from the drains, or sewage backup.
• Main line clogs are not a DIY job and should always be cleared by a professional drain cleaner.
• Hydro jetting takes 2 to 3 hours on average, depending on the sewer length, configuration, and type of debris clogged.

Cost To Clean A Sewer Line

The average cost to clean a sewer line is $150 to $800, depending on the cleaning method, severity of the clog, and drain line accessibility.

Hydro Jetting Cost

Hydro jet drain cleaning costs $250 to $800 on average, depending on the severity of the blockage and accessibility to the sewer line. Hydro jetting a severely clogged residential sewer line costs $1,000 or more. Commercial hydro jetting costs $500 to $3,000.

• Deeper clean that lasts longer than snaking, but is more expensive.
• Hydro jetting uses a high-pressure water jet to clean pipes and clear tree roots, grease, scale buildup, mineral deposits, and debris.
• Eco-friendly and safe to use on all types and sizes of pipes.
• Can damage weak or older pipes. May require video camera inspection to check the structural integrity of the pipes.

Cost To Snake Main Sewer Line

The average cost to snake a main sewer line is $150 to $500, depending on the drain accessibility, severity of the clog, and labor. Snaking or rodding a main drain through the sewer cleanout is the cheapest method while using the roof drain vent or by removing a toilet costs the most.

• Most common method. Uses a flexible drain auger to punch a hole through most clogs.
• Snaking is cheaper than jetting, but is not as effective.
• Does not clean the entire pipe and leaves behind residue and debris.
• Works on older homes with pipes too weak for jetting.

Chemical Cleaners To Unclog Sewer Line

Chemical drain cleaners cost $15 to $100 to assist unclogging a sewer line. Chemical cleaners target grease, tree roots, and debris in sewer lines but are not as effective as hydro jetting. Chemicals are typically used for bi-annual maintenance or after rodding or jetting to help keep pipes clean longer.

Repairing or Replacing A Main Drain

Sewer lines may be broken, cracked, collapsed, or filled with tree roots. Sewer line repair costs $500 to $1,000 if the pipes are accessible or $1,000 to $4,000 for pipes buried outdoors. Prices depend on the pipe type and length, location and accessibility, job complexity, and cleanup.

Additional costs may include:

• Foundation repair costs $2,300 to $6,700
• Sod installation costs $0.90 to $1.80 per square foot
• Landscaping costs $4 to $12 per square foot
• Driveway repair costs $500 to $2,500
• Patio or walkway repair costs $500 to $2,200

Return to Top

Sewer Drain Cleaning Cost Factors

Depending on the severity of the job, additional costs may include a sewer camera inspection, sewage cleanup, removing a toilet to access the drain, or installing a cleanout for easy access.

Plumber Costs To Unclog Main Sewer Line

Plumbers charge $45 to $150 per hour to diagnose and unclog a main sewer line. Some plumbers charge a $50 to $200 service fee, which may cover the first hour of work. Other factors include:

• Severity – A severe main line clog takes hours to unblock, whereas snaking a bathroom or kitchen drain may take five minutes. Removing tree roots or hazardous sewage backup adds to the total cost.
• Access – Older homes without a sewer cleanout are harder to access the main line through a sink, tub, or toilet pipes. Sewer drains with multiple bends and connection points take longer to clean.
• Damaged Pipes – Sewer lines may be broken, cracked, collapsed, or filled with tree roots requiring repairs or replacement.

How To Clean Sewer Line

Professional sewer companies follow this sewer cleaning process:

1. Diagnose – First, the plumber asks questions about the location of the backup and any symptoms noticed.
2. Cleanout Access – The plumber locates the sewer cleanout that gives main line access in both directions.
3. Pressure Release – The plumber turns off the water at the main supply (street level) and removes the cleanout plug.
4. Inspection – The plumber may perform a camera inspection in the sewer cleanout line to diagnose the problem and check the pipes for any cracks or damage that could be aggravated by hydro jetting.
5. Cleaning Process – The plumber inserts a drain auger or hydro jet hose and nozzle into the cleanout line to clear the debris, tree roots, or buildup and to descale iron sewer pipes.
6. Final Inspection – The plumber tests the drains and may conduct a sewer camera inspection to ensure everything is thoroughly flushed out.
7. Chemical Application – Once pipes are professionally cleaned, regular RootX or Bio-Clean applications help keep pipes clean longer.

Kitchen & Bathroom Clogs

The average cost to unclog a drain is $100 to $275 for a bathroom or kitchen sink, toilet, tub, or shower. Basic drain clogs can be handled yourself by buying a drain snake for $15 to $100, renting a machine auger for $30 to $80 per day, or using chemical cleaners.

Main Line Blockages

Main lines connect from your home to the city's sewer main. Main sewer pipe cleaning should always be handled by a professional. Main sewer line blockages could run under the home or be up to 100' away from the house, requiring expensive hydro jets, cameras, and augers.

Sometimes when the main line backs up, the pressure blows the toilet seal causing it to leak around the base. Removing and resealing a toilet costs $100 to $150.

Sewer Scope Inspection

A sewer scope inspection costs $125 to $500 on average, and allows the plumber to locate clogs or damaged areas with a video camera. Schedule a sewer inspection for drains more than 20 years old or lines with frequent blockages.

Plumbers may recommend a sewer inspection to check for damage before cleaning or if snaking or hydro jetting doesn't unclog the sewer line.

Cost To Remove Tree Roots In Sewer Line

Removing tree roots in a sewer line costs $200 to $600, depending on the method. Once removed, plumbers recommend annual or bi-annual chemical treatment that helps prevent tree roots. Sewer lines with severe tree root damage require replacement at $1,000 to $4,000.

• After hydro jetting, tree roots typically take 3 to 7 years to grow back, without chemical treatments.
• A sewer video inspection costs $200 to $500 and helps diagnose any pipe damage and the severity of the roots.
• In some cases, the invasive roots have to be dug up around the sewer pipe.

Sewage Backup Cleanup Cost

Sewage backup cleanup costs $1,000 to $5,000 on average or $7 per square foot without repairs. Raw sewage cleanup costs depend on the size of the spill, length of time the sewage sits, and type of materials damaged.

Clogged sewer lines and overflowing septic tanks cause raw sewage to back up in sinks, showers, toilets, and drains. Septic tank cleaning costs $275 to $600 for spills caused by a backed-up septic tank.

Sewage backup should be considered an emergency. Raw sewage is considered category 3 black water and may contain viruses, bacteria, parasites, mold, and other microbes that cause serious illnesses.

Return to Top

Roto Rooter Hydro Jetting Cost

Roto-rooter hydro jetting costs $500 to $900 on average, to clean a main sewer drain. Roto-Rooter requires an on-site inspection before providing a flat rate water jet estimate. Some Roto-Rooter franchises charge a $70 to $200 trip charge, which may be deducted if you have the work done.

Most Roto-rooter franchises provide a 90-day warranty on sewer cleaning.

Storm Drain Cleaning Cost

Storm drain cleaning costs $200 to $600 on average, depending on the type and size of drainage system and cause of clog. Storm drains need cleaning when the catch basin is half-full or when flooding occurs in the yard, driveway, streets, or basement after a rainstorm.

Drainage pipes typically need a video camera inspection to determine the source of clogs or leaks.

Without regular cleaning, backups and clogs can lead to flood, foundation, and septic tank damage. If hydro jetting or snaking doesn't penetrate the clogged area, and dirt, mud, and rocks are removed from the drain, a broken drain pipe may need replacing.

Public Storm Drain Cleaning

The city or municipality is responsible for cleaning public storms drains. For drainage systems connected to the storm drain, such as catch basins, French drains, yard drainage pipes, or sump pumps, it is the property owner's responsibility.

Avoid using chemical cleaners in storm drains as water flows directly into the closest body of water taking these chemicals with them.

Return to Top

Sewer Cleanout Cost

Sewer cleanout installation costs $600 to $2,000 on average, depending on the condition of existing pipes and excavation work required. Sewer cleanouts provide access to the main sewer line for plumbing snakes and hydro jets to clear clogs or drain a backup.

Most homes built after 1970 have one or more cleanouts due to plumbing code. For older homes with the original plumbing, it's best to have one installed.

Without a sewer cleanout, clearing a main line clog requires accessing the pipes from the sinks, tubs, and toilets.

Return to Top

Signs Main Sewer Line Is Clogged

Signs your main sewer line is clogged include:

• Multiple Fixtures Clogged – If the toilets, tubs, sinks, and showers are all backed up at once or draining slowly, the main sewer line is likely clogged.
• Pipes Making Gurgling Sounds – If the toilet bubbles and gurgles when the bathroom sink is running (after a minute), air is trapped in the plumber system which signals a clogged sewer line.
• Sewage Backup – When the toilet is flushed, water backs up into the bathtub or shower. When the washing machine drains, sinks and toilets start to overflow. Clogged sewer lines prevent water from going down the drain.
• Drainage In Cleanout – Sewage standing in or draining out of the sewer cleanout if a sign of a clog.
• Bad Odors – When lines are clogged, sewage backs up causing bad smells to come up from floor drains.
• Frequently Clogged Drains – Drains that continuously clog, especially on the first floor of the home, signal a break or blockage in the sewer pipe.

What Causes Sewer Backup

The leading causes of sewer backup are pouring grease down the drains, flushing debris, tree root infiltration, and bellied piping.

• Severe Pipe Damage – Broken or ruptured sewer pipes can't properly drain, which causes frequent backups.
• Tree Roots – Tree roots can infiltrate pipes and cause blockages as they expand over time.
• Bellied Pipes – Sagging or sinking sewer lines due to ground or soil conditions causes a "bellied" pipe. This low spot collects debris and waste, which results in repeat blockages.
• Flushing Debris – Flushing debris such as paper towels, feminine hygiene products, and thick toilet paper can cause blockages.
• Pouring Grease – Grease, fats, and oils poured down the drain will harden and lead to clogged lines.

Preventing Main Sewer Line Clogs

Preventative maintenance for sewer lines includes:

• Install a drain catcher to prevent debris or hair from going down bath or shower drains.
• Avoid pouring grease, fats, and oils down the drain.
• Don't flush napkins, paper towels, feminine hygiene products, or too much toilet paper at once down the drains.
• Avoid putting food particles, coffee grounds, eggshells, rice, pasta, or flour down the sinks drains.
• Avoid planting trees and shrubs near sewer lines.
• Pour hot water down the drains frequently to help dissolve clogs.
• Use chemical treatments to keep tree roots out of the pipes.
• Replace cast iron or clay drains with plastic PVC pipes.
• Install a backwater prevention valve that allows sewage to go out but not come back in.

Return to Top

Frequently Asked Questions

What Is Jetting A Sewer Line?

Hydro jetting a sewer line is a method of sewer and drain line cleaning by using high-pressure water streams through specialized jetting nozzles. Sewer jetting clears obstructions that may be causing clogs and prevents sewage backups.

How Often To Clean Sewer Lines?

Most homeowners clean their sewer lines on an "as-needed" basis at the first sign of any issues. For preventative measures, sewer lines should be cleaned every 18 to 22 months. Schedule a video inspection for sewer lines more than 40 years old or lines with frequent problems.

How Long Does Hydro Jetting Last?

Some plumbers guarantee hydro jetting lasts 2 years and offer a no-clog warranty. After hydro jet cleaning, most tree roots take between 3 and 7 years to grow back.

How Long Does Hydro Jetting Take?

Hydro jetting takes 2 to 3 hours on average, depending on the sewer length, configuration, and type of debris clogged. After the equipment is set up, pumping water through the drains takes about an hour. A final sewer camera inspection takes another hour to ensure the pipes are clean.

Will Drano Unclog Main Sewer Line?

Drano does not unclog sewer lines. Misusing Drano can damage plastic drain pipes and can cause physical injury. Alternatives to clean main lines are RootX, copper sulfate, and enzymatic drain cleaners such as Bio-Clean.

Does Homeowners Insurance Cover Tree Roots In Sewer Line?

Tree roots in a sewer line are not covered by standard homeowners insurance. Invading tree roots are considered a maintenance issue, and most homeowners' insurance policies don't cover any maintenance around the house.

Return to Top

DIY Sewer Line Clearing Cost

Always hire a professional plumber to diagnose and clean main sewer lines. Machine augers and hydro jets are available to rent, but they can crack drains and cause expensive repairs when misused. Minor toilet, sink, or tub clogs can be cleaned yourself using a plunger, snake, or chemicals.

Hydro Jetting Machine Cost

Hydro jetting machines cost $1,500 to $4,500 on average for residential cart models and between $5,000 and $20,000 for commercial trailer models. Prices depend on the engine size, PSI, portability, and drain size capacity.

Hiring A Sewer Cleaning Company

Before hiring a sewer company to unclog your main line, be sure to:

• Get at least three estimates to compare.
• Ask for recommendations from family, friends, and neighbors.
• Read reviews and check out their previous work on HomeGuide, Google, and the Better Business Bureau (BBB).
• Select companies that are insured, bonded, licensed, and have been in business for longer than five years.
• Avoid selecting the cheapest quote as quality may suffer.
• Ask for a written warranty on their work, including any parts.
• Avoid making large payments upfront, and never pay in cash.

Can I Get Cheap Sewer Line Cleaning?

The cheapest sewer line cleaning starts at $100 for snaking or rodding, which may not be effective. Improper cleaning can lead to larger problems in the future. Avoid expensive retailers such as Roto-Rooter and Mr. Rooter and hire a local plumber instead to save.

Get free estimates on HomeGuide from trusted plumbers:

Get free estimates