How Much Does It Cost To Unclog or Snake A Drain?

Cost To Snake A Drain

The average plumber cost to snake a drain is $100 to $275 for a toilet, sink, tub, shower, or laundry drain. The average cost to snake a main line is $150 to $500. Roto-Rooter prices are $225 to $500 on average to snake a drain. Drain snake rental costs $30 to $80 per day.

*Prices depend on the severity of the clog. Some plumbers charge a $50 to $200 minimum service fee.

• Signs of a clogged drain include gurgling sounds, water backing up or pooling, water draining slowly, toilet not flushing, or bad odors.
• Plumbers take about five minutes to snake a drain for clogs located near the tub, toilet, or sink.
• Main sewer line clogs impact all the drains and fixtures at once.

Plumber Cost To Unclog Drain

Plumbers cost $75 to $550 to unclog a drain, depending on the hourly rates, accessibility, severity, and cause of blockage. Most plumbers offer flat rates on basic drain cleaning, while unclogging severe drains is billed at $45 to $150 per hour plus parts.

Drain Rodding Cost Factors

• Labor – Plumbing estimates vary depending on the job size, travel distance, region, and season.
• Trip Charge – Some plumbers' offer free estimates, while others charge a $50 to $200 call-out fee, which typically covers the first hour of work.
• Accessibility – Main line clogs are harder to access than tub or sink basin blockages. Some jobs require accessing multiple connection points or temporarily removing the toilet.
• Severity – Most blockages take five minutes to snake, whereas multiple clogged pipes or a severe main line clog takes hours to unblock and may require a video camera inspection.
• Blockage Cause – Hair, food waste, dirt, and soap scum are easier to unblock than tree roots, broken pipes, or grease.
• Unforeseen Damage – Plumbers may need to replace plumbing pipes, toilet parts, or garbage disposal.

Return to Top

Roto-Rooter Cost

Roto-Rooter costs $225 to $500 on average to snake pipes and clean drains. A Roto-Rooter sewer camera inspection costs $295 to $350 on average. Roto-rooter hydro jetting costs $500 to $900 on average, to clean a main sewer drain.

Roto-Rooter is a national franchise, and each franchisee has a flat rate price list. Typically, a plumber assesses the costs after an in-person service call.

Some Roto-Rooter franchises charge a $70 to $200 trip charge, which may be deducted if you have the work done.

Return to Top

How Much Is A Plumbing Snake?

A handheld or drill-activated plumbing snake costs $15 to $100 and reaches up to 25 feet for minor clogs near the sink basin or toilet. A machine-powered plumbing snake costs $250 to $1,000 on average and reaches 50 to 75 feet for most residential blockages.

Drain snake prices depend on the type, cable length, and cable diameter. The types of plumbing snakes include mini-rooters, toilet augers, top snakes, and snakes for large drains.

What Size Drain Snake Do I Need?

Drain snakes range from 25' to 100'. A 25' snake unclogs showers, tubs, and bathroom sinks. A 50' to 75' plumbing snake clears washing machines, bathroom and kitchen sinks, and roof vents. A 75' to 100' snake unblocks drains 3" or larger. A toilet auger is specifically made for toilets.

*Using the wrong type or size plumbing snake can damage the pipes.

Return to Top

Drain Snake Rental Cost

Drain snake rental costs $30 to $80 per day, between $125 and $300 per week, or from $300 to $1,000 per month, depending on the machine auger size. Handheld plumbing snake rental costs $10 to $15 per day. Plumbing snakes are available for rent at Home Depot and Lowe's.

*Renting a machine augers typically requires a $100 to $150 deposit.

Machine augers are hard to manage and can damage pipes or pose a risk of injury if misused.

• A drain snake used with too much force can cause the end to flop around, scratching the pipe. Scratches damage the coating, which leads to cracks or rusting in the pipes.
• A drain snakes coil wire can recoil at high speeds, which can cause serious injury.
• If you are unsure how to use a snake, hire a skilled plumber.

Return to Top

Drain Cleaning Cost By Service

Drain cleaning costs $100 to $275 on average for a toilet, sink, tub, or shower drain. Cleaning multiple fixtures at once or complex clogs in the main line costs $200 to $800. The most cost-effective solution is cleaning the blockage right away to prevent the problem from worsening.

Plumber Cost To Unclog a Toilet

The average cost for a plumber to unclog a toilet is $100 to $275. Plumbers charge depending on if a toilet snake can unblock the clog or if the toilet needs removing to clear the blockage. A toilet snake costs $10 to $30 for DIY jobs.

• If a bad odor persists after snaking the toilet, toilet repair costs $10 to $25 to replace a cracked flange or wax ring. For DIY, a new toilet wax ring costs $2 to $10.
• If backflow is also coming out of other drains, the main sewer line likely needs to be cleared of tree roots and debris, increasing the total cost.

Cost To Unclog Kitchen Sink & Garbage Disposal

The average cost to unclog a kitchen sink is $100 to $220. When unblocking a sink with a garbage disposal, the plumber first confirms the unit is not the problem. Then, the drain trap fitting and drain arm are removed to snake the pipes. If the sink is still clogged after snaking, garbage disposal replacement costs $185 to $379 on average.

Cost To Clear Blocked Drain in Tub or Shower

The average cost to snake a tub drain is $100 to $250. Bathtubs and showers fill with hair, dirt, and soap scum and need regular cleaning. Clearing a blocked shower or tub drain requires removing the drain assembly and cover plate and using a drain auger to remove the clog.

Main Line Drain Clearing Cost

Main sewer line cleaning costs $150 to $800, depending on the method (snaking or hydro jetting), severity of the clog, accessibility, and labor. The main line is likely clogged when pipes have bad odors or make gurgling sounds, multiple fixtures are draining slowly, or sewage backup.

A professional plumber should always be clear main line clogs. Broken, cracked, or collapsed sewer lines may need replacement. Sewer line repair costs $500 to $4,000, depending on the pipe's length and accessibility.

Plumbing Vent Cleaning Cost

Plumbing vent cleaning costs $100 to $200 on average. Signs stacks aren't venting include bad odors, slow drainage, gurgling noises, or when someone flushes a sink and another sink makes a noise. Using an open cover or screen at the end of the vent pipe prevents debris from clogging.

Return to Top

Signs of A Clogged Drain

• The toilet is bubbling, making a gurgling sound, or doesn't flush
• Water backs up to or is pooling near the sink, tub, shower, toilet, or laundry area
• Water drains slowly from the sink, tub, commode, or shower
• Several plumbing fixtures are clogged at once
• Bad odors are coming from drains
• Water is coming out of a cleanout plug

Common Causes of Clogged Drains

• Bathroom Sink / Tub – Hair, dirt, soap scum, and toothpaste buildup.
• Kitchen Sink – Grease, fat, soap scum, and food waste from disposal buildup.
• Toilet – Wipes, pads, paper towels, toilet paper, cat litter, and feminine products buildup.
• AC Drain – Mold, mildew, algae, fungi, lime, plants, and mineral buildup.
• Main Line – Tree roots, broken pipes, and debris.

When to Call a Plumber for a Clogged Drain

Minor blockages in a single pipe may be resolved with a plunger or plumbing snake. Otherwise, a plumber can quickly and safely clear blocked drains and other plumbing problems. Call a plumber to fix a clog when:

• There's a mess that's spreading, such as sewage backup, flooding, or standing water.
• The blockage affects multiple plumbing fixtures or every drain in the house; then, there's likely a main sewer line clog.
• The clog is disabling a critical area such as the kitchen sink or the main bathroom.
• Using a plunger or drain snake fails to remove the clog.

Return to Top

DIY Costs To Unblock A Drain

DIY drain cleaning is possible on individual drains with minor blockages. Try these methods before calling a plumber.

Use a Plunger

Sink and toilet plungers use suction to free clogs and draw the debris up to the surface. Make sure the plunger is the right type and size for the fixture. Turn off the garbage disposal unit and never plunge right after using chemical drain cleaner.

Chemical Drain Cleaner

Chemical drain cleaners such as Drano, Green Gobbler, or Liquid-Plumr are safe to use with plastic pipes or metal pipes when following the label's directions. Avoid using acidic chemical cleaners that contain sulfuric acid or hydrochloric acid, which can damage pipes when misused.

Another option to prevent clogs is by using a homemade drain cleaning with baking soda, vinegar, and boiling water.

Clean Out Trap

The U-shaped pipe or P-trap beneath the tub or sink basin can be removed to clear out any blockage.

1. Place a bucket under the P-trap
2. Use pliers to remove the two coupling nuts
3. Clean the trap interior with a straightened wire coat hanger or brush
4. If the trap is clean, try inserting a drain snake
5. Reassemble the trap

Another option is using a water-powered pulsating valve, such as a Drain King Kit, to unclog a blocked P-trap.

Snake The Drain

Home improvement stores sell and rent affordable drain snakes to unblock clogs. However, using the wrong size or type of plumbing snake could push the clog farther down the drain, loop back on itself, or scrape the pipe, causing damages.

When a drain snake fails to remove a clog or if the main line is clogged, call a professional plumber.

Return to Top

How To Prevent Drains From Clogging

Regular maintenance is the key to preventing clogged drains.

• Installing metal screens and sink traps catches hair and debris and helps keep drains clean.
• Installing a water softener costs $800 to $3,000 on average and prevents mineral buildup that clogs pipes.
• Avoid pouring any fats, oils, or greases down the drain.
• Avoid putting coffee grounds, bones, eggshells, nuts, pits, corn husks, shells, pasta, oatmeal, onion skins, potato peels, fruit rinds, pumpkin, or fibrous vegetables down the garbage disposal.
• Avoid flushing anything other than toilet paper down the toilet.
• A cost-effective homemade drain cleaner using baking soda and vinegar can remedy a slow-draining tub, shower, or sink.

Homemade Drain Cleaner

Here's how to create a homemade drain cleaning solution:

1. First, pour a pot of boiling water down the drain.
2. Next, push 1 cup of baking soda down the drain.
3. Then, add a 1 cup water/1 cup vinegar solution.
4. Cover with the drain plug and wait 10 to 20 minutes.
5. Flush the drain with boiling water again.

If this solution does not clear the drain, try a stronger chemical solution, or hire a plumber.

Return to Top

Frequently Asked Questions

How Long Does It Take To Snake A Drain?

Plumbers take about five minutes to snake a drain for clogs located near the tub, toilet, or sink. Main line sewer clogs can take hours to snake, depending on the length and number of pipes affected.

How Much Does It Cost To Replace Drain Lines?

In rare cases, severe clogs may require replacing the drain lines. Drain line repair costs $300 to $1,500 on average to replace a section of piping. Prices depend on the drain material, length of replacement, location in the home, and accessibility.

Return to Top

Tips For Hiring A Drain Cleaning Plumber

Before hiring a plumber to unclog your drain, be sure to:

• Get at least three estimates to compare.
• Ask for recommendations from family, friends, and neighbors.
• Read reviews and check out their previous work on HomeGuide, Google, and the Better Business Bureau (BBB).
• Select companies that are insured, bonded, and have been in business for longer than five years.
• Avoid selecting the lowest quote as quality may suffer.
• Ask for a written warranty on their work, including any parts.
• Avoid making large payments upfront, and never pay in cash.

Get free estimates on HomeGuide from trusted plumbing contractors:

Get free estimates