Mountain View, CA

How much does concrete resurfacing cost?

$3 – $7 Per square foot
$300 – $700 100 SF patio, pool deck, or floors
$1,200 – $2,900 Average 2-car driveway

Concrete resurfacing costs $3 to $7 per square foot for a driveway, pool deck, patio, walkway, or floors. A decorative or stamped concrete overlay costs $6 to $20 per square foot. A 2-car concrete driveway resurfacing costs $1,200 to $2,900. Cool deck installation costs $3 to $6 per square foot.

Get free estimates from concrete resurfacing contractors near you or view our cost guide below.

Reviewed and approved on February 4, 2021, by Tom Grupa and 16 expert concrete repair companies on HomeGuide.

Concrete resurfacing cost

Basic concrete resurfacing costs $3 to $7 per square foot. A decorative or stamped concrete overlay costs $6 to $20 per square foot. Concrete driveway resurfacing costs $1,200 to $2,900. Concrete pool deck resurfacing costs $3 to $6 per square foot. Adding a cool deck costs $4 per square foot.

Concrete resurfacing cost - chart
Concrete resurfacing cost - chart

Concrete resurfacing cost
Size Average cost
10'x10' Patio $300 – $700
10'x20' Patio or driveway (1-car) $600 – $1,400
12'x24' Driveway (1-car) $850 – $1,500
20'x20' Driveway (2-car) $1,200 – $2,000
24'x24' Driveway or garage (2-car) $1,700 – $2,900
24'x36' Driveway (3-car) $2,600 – $4,300
4'x50' Sidewalk or walkway $600 – $1,400
18" Pool deck border (135 SF) $400 – $800
4' Pool deck border (360 SF) $1,100 – $2,200
Basement or slab (800 SF) $2,400 – $4,000

Concrete resurfacing involves removing the top layer of the slab, repairing minor cracks and flaking, and applying a thin overlay system that may include colors, patterns, or textures.

Concrete resurfacing steps - before and after
Concrete resurfacing steps - before and after

  • Resurfacing is more cost-effective than replacement and creates the look of new concrete.
  • Concrete resurfacing lasts 8 to 15 years before needing any repairs.

Average cost to resurface concrete

Average cost to resurface concrete per 100 square feet
Average cost to resurface concrete per 100 square feet

Average cost to resurface concrete (per 100 square feet)
National average cost $500
Minimum cost $300
Maximum cost $2,000
Average range $300 to $700

*Based on 351 project costs reported by HomeGuide members.

Find top-rated concrete repair companies near you. View Pros

Concrete driveway overlay with decorative pattern
Concrete driveway overlay with decorative pattern

Concrete resurfacing cost per square foot

Concrete contractors estimate resurfacing costs on the project size, existing surface condition, and the type of overlay system. Repairing cracks, grinding or leveling the concrete, and adding stamped patterns or multiple colors increases the cost.

Concrete resurfacing cost per square foot
Location Basic design Complex design
Driveway $3 – $5 $7 – $20
Pool deck $3 – $6 $6 – $12
Patio or walkway $3 – $7 $7 – $20
Interior floor $3 – $8 $5 – $15
Garage floor $3 – $5 $4 – $7
Basement floor $3 – $5 $4 – $7
Outdoor stairs $3 – $7 $7 – $20

*Minimum service fees may apply.

Decorative concrete driveway resurfacing - before and after
Decorative concrete driveway resurfacing - before and after

Concrete driveway resurfacing cost

Concrete driveway resurfacing costs $3 to $5 per square foot or $1,200 to $2,900 for an average two-car driveway. Resurfacing makes the driveway look new and is cheaper than the cost to install a new concrete driveway at $4 to $8 per square foot.

Adding a heated driveway system costs $6 to $10 per square foot extra.

Concrete driveway resurfacing cost - chart
Concrete driveway resurfacing cost - chart

Get free driveway resurfacing estimates. View Pros

Concrete pool deck resurfacing cost

Concrete pool deck resurfacing costs $3 to $6 per square foot for basic overlays and $6 to $12 per square foot for decorative designs. Adding a coating of Kool Deck costs $4 per square foot and improves the appearance and durability, keeps the surface cool, and creates a non-slip texture.

Concrete pool deck resurfacing cost - chart
Concrete pool deck resurfacing cost - chart

Resurfacing a patio or walkway cost

The average cost to resurface a concrete patio or walkway is $3 to $7 per square foot for a plain overlay or $7 to $20 per square foot for a stamped overlay. Resurfacing is cheaper than the cost to install a new concrete patio at $4 to $12 per square foot.

Cost to refinish concrete floors

The cost to polish a concrete floor is $3 to $8 per square foot for basic designs and $5 to $15 per square foot for elaborate designs. Prices depend on how many levels of grinding are needed to smooth the surface. Refinishing may also include color staining or sealing.

Cost to resurface garage floors

Resurfacing a concrete garage floor with an epoxy coating costs $3 to $7 per square foot or $1,300 to $3,000 for an average two-car garage. Epoxy protects the surface from staining, chipping, and cracking. DIY epoxy kits for garage floors cost $75 to $200.

Basement and slab foundation resurfacing cost

Resurfacing a concrete basement floor slab costs $3 to $7 per square foot for an epoxy coating or a self-leveling concrete overlay. A resurfaced floor adds moisture protection and stain-resistance and may include decorative colors or patterns.

Cost to resurface concrete steps

Resurfacing concrete steps costs $150 to $500, depending on the damage. Only repairing the damaged areas costs the least, but the area will look different than the other steps. For stairs with large cracks, heaving, settling, or where height cannot be raised, replacement is a better option.

New precast concrete steps cost $70 to $110 per step, and pouring cement costs $200 to $400 per step installed. Removing the existing concrete steps adds $250 to $500.

Return to Top

Concrete overlay costs

A basic concrete overlay costs $3 to $7 per square foot. A decorative concrete overlay costs $6 to $10 per square foot and includes stains, dyes, textures, embeds, saw cuts, or other design elements. Stamped concrete overlays cost $7 to $20 per square foot and replicate stone, brick, or tile.

Concrete overlay cost per square foot
Type Cost per square foot Cost per 100 square foot
Basic $3 – $7 $300 – $700
Decorative $6 – $10 $400 – $1,000
Stamped $7 – $20 $700 – $2,000

*Minimum service fees may apply.

Consult with concrete contractors near you. View Pros

Types of concrete overlay

A concrete overlay is a thin layer of cement and polymer resin spread on top of an existing concrete surface to cover minor damage or add color and decoration. Overlays may be as thin as a feather finish or up to 2" thick, depending on the style, type, and texture.

Contractor installing concrete overlay with concrete resurfacer
Contractor installing concrete overlay with concrete resurfacer

Types of concrete overlay
Type Thickness Color options Finish options
Micro-topping or skim coat 1/32" to 3/16" Solid or stenciled colors; stains, tints, or dyes Smooth or shallow textured
Knockdown, spray down, or trowel down 1/8" Integral pigments; solid, stenciled, or patterned Splatter coat or shallow textured
Stampable 1/4" to 3/4" Integral pigments; stains, tints, and dyes Textured to look like stone, brick, or tile
Self-Leveling 1/4" to 2" Solid or stenciled colors; stains, tints, and dyes Smooth and flat, sawcut, or engraved

Stamped concrete overlay cost

Stamped concrete overlays cost $7 to $15 per square foot for a single pattern or $15 to $20 for more complex designs. Stamped concrete replicates the look of stone (flagstone or cobblestone), brick, natural rock, or tile. A texturized mat or rolling tool imprints a pattern into the wet concrete surface.

Stamped overlays are installed over an existing concrete slab or wall.

Decorative concrete resurfacing cost

Decorative concrete resurfacing costs $6 to $10 per square foot and may include colored stains, dyes, shallow textures, and other design elements. Decorative overlays are thinner and less expensive than stamped overlays.

Return to Top

Pros and cons of a concrete overlay

Pros and cons of a concrete overlay
Advantages Disadvantages
  • Durable and long-lasting
  • Low maintenance
  • Abrasion and stain resistant
  • Many styles and colors available
  • Makes the surface look new again
  • Cheaper than pouring new concrete
  • Won't fix concrete with major cracks or crumbling
  • Hard on feet and back
  • Retains cold
  • May become slippery when wet
  • Difficult to DIY

Return to Top

Process to resurface concrete

Concrete resurfacing requires prep work, including cleaning and repairing the existing concrete slab before applying the new overlay. Inadequate surface preparation is the most common cause of cracking and delamination in a new overlay.

Concrete shifts at its expansion joints during season changes, often cracking the overlay above it. Resurfacing is only possible over concrete with stabilized expansion joints and a strong foundation.

1. Power washing

Power washing costs $0.35 to $0.77 per square foot and removes dirt, oil, mildew, and grease from the concrete. Ensure the contractor also strips off any sealers, paint, or coatings on the surface.

2. Concrete repair or removal

The new concrete surface will only be as stable as the foundation beneath it. Weak, crumbling, or uneven concrete must be repaired before resurfacing.

Driveway repair costs $0.50 to $3 per linear foot to fill cracks in concrete. Cracks wider than 1/4" typically indicate unstable foundation problems that cause more cracks to appear after resurfacing. Hire a structural engineer to inspect the concrete to determine the underlying cause.

3. Mudjacking and leveling concrete

The average cost for concrete leveling is $3 to $6 per square foot for mudjacking or $5 to $25 per square foot for foam leveling. Installers drill holes in the existing slab and pump a mud-like mixture or polyurethane foam underneath to lift the slab until it's level.

4. Pouring new concrete

After cleaning and prepping the concrete, the contractor primes the surface with a bonding agent and applies the new overlay. Concrete prices are $119 to $147 per yard for materials only.

If the existing concrete is too damaged for resurfacing, pouring a new concrete slab costs $4 to $8 per square foot, depending on the slab's thickness and whether the installation includes wire mesh or rebar reinforcement.

5. Coloring, pattern, and finish

  • Color: Use an integral pigment mixed with the concrete before application or add color to the surface afterward with stains.
  • Pattern: Stamp a texture into the wet concrete before it cures or use dye to stencil decorative patterns.
  • Finish: Concrete sealing costs $0.10 to $0.40 per square foot for DIY materials or $0.53 to $2.40 per square foot for professional sealant, which protects the new surface and preserves its appearance.
Before DIY, get free quotes for your project. View Pros

Return to Top

What is a concrete overlay?

A concrete overlay is a thin layer of cement and polymer resin applied on top of an existing concrete surface to repair minor damage or add decoration. Overlays range from 1/32" to 2" thick and may include stones, colors, or stamped designs.

Does concrete resurfacing last?

Concrete resurfacing lasts 8 to 15 years before needing any repairs. Most concrete overlays last as long as the concrete base underneath them. If the foundation is weak or the surface is not prepared correctly, cracks and delamination may appear in the new overlay.

Should I repair, resurface, or replace my concrete driveway, patio, or walkway?

Repair or resurface concrete with minor flaking or cracks less than 1/4" wide. Replace concrete surfaces with large cracks, crumbling, spalling, or structural problems. If the repair requires a new layer more than two inches thick, replacement is a better option.

Concrete resurfacing and overlays require a stable foundation. Large cracks in the existing concrete will quickly transfer up through the new surface.

Are resurfacing and refinishing concrete the same thing?

Concrete refinishing and resurfacing are two different things:

  • Refinishing adds, changes, or restores color or shine to an undamaged, level concrete surface.
  • Resurfacing removes and replaces the top layer of concrete, correcting surface damage and optionally adding decorative colors or stamping.
Resurface vs. refinish concrete
Factor Resurface Refinish
Level concrete with stable foundation and no major cracks Yes Yes
Damaged concrete that needs repairs Yes No
Add color or a glossy sheen No Yes
Add decorative texture or stamped design Yes No
Add protective barrier to minimize maintenance No Yes

How much does asphalt driveway resurfacing cost?

Asphalt driveway resurfacing costs $1 to $3 per square foot, or $400 to $1,800 for an average 2-car driveway.

Does concrete resurfacer really work?

Concrete resurfacer works to cover minor damage or change the look of a driveway, patio, or floor. When applied properly, resurfacer improves the concrete's appearance and durability and extends the slab's lifespan. Resurfacing does not repair cracks or fix an unstable foundation.

Can you stamp concrete over existing concrete?

Stamped concrete overlays can be applied over existing concrete. Professional installers pour a thin layer of new cement mixed with polymer resin on top of the old concrete and use rubber stamp mats to add patterns or textures to the new surface.

How much does it cost to paint a driveway?

Painting a concrete driveway costs $2 to $4 per square foot but may result in uneven color or flaking. One alternative to painting is to resurface the driveway with concrete that has pigment already mixed in, which lasts longer and creates a more even color throughout the concrete.

Still have questions? Ask a concrete repair pro. View Pros

Return to Top

DIY concrete resurfacing costs

Home Depot, Lowe's, and other home improvement stores sell DIY concrete resurfacer for $20 to $40 for a 40-lb bag, enough to cover 15 to 80 square feet depending on thickness. The total project cost depends on the size of the area and whether you rent or purchase the required tools.

Avoid buying concrete mortar mix or patching compound, which is cheaper but doesn't include the bonding agents that allow the concrete resurfacer to adhere to the existing slab.

DIY resurfacing involves power washing the concrete, prepping it with adhesive, then mixing and pouring the concrete resurfacer and spreading it quickly before it sets. Most jobs require a team of at least two people working together.

Return to Top

Getting concrete resurfacing cost estimates

Professional contractors have the tools and experience to ensure the job is done quickly and correctly. Before hiring a pro and signing a contract, be sure to:

  • Get at least three estimates to compare.
  • Let professionals know you’re getting bids from multiple contractors so they offer you their best competitive price.
  • Read reviews and check out their previous work on HomeGuide, Google, and the Better Business Bureau (BBB).
  • Select companies that are insured, bonded, and have been in business for longer than five years.
  • Avoid selecting the lowest quote as quality may suffer.
  • Get a detailed estimate with a full breakdown of all costs involved.
  • Ask for a written contract and warranty.
  • Avoid making large payments upfront. Come up with a payment schedule for the work completed.

Questions to ask

  • Do you have a portfolio of previous projects I can view?
  • Are you licensed, insured, and bonded?
  • How do you handle unexpected project delays?
  • How do you handle damages that happen on the job?
  • What permits do I need, and will you obtain them?
  • What does your warranty policy include?
  • What is your payment schedule?

Get free estimates on HomeGuide from trusted concrete resurfacing companies:

Get free estimates


concrete resurfacing
Looking for concrete resurfacing near you?
Get free custom quotes from qualified pros in your area.

Looking for concrete resurfacing near you?


Answer some questions

Let us know about your needs so we can bring you the right pros.

Get quotes

Receive quotes from multiple pros that meet your exact needs.

Hire the right pro

Compare quotes, message or call pros, and hire only when ready.